-Automatic self-priming peripheral pump -Voltage: 220V-240V-50/60Hz -Input Power: 370 W(0.5HP) -Max Head: 32M * Max Flow: 35L/min -Max Suction: 8M * Pipe Diameter:1"x1" -Copper Wire Motor *Copper Impeller *0.15m length cable -1 pc pressure switch * 1 pc 2L pressure tank

-Peripheral Pump -Voltage: 220V-240V-50/60Hz -Input Power: 550W(0.75HP) -Max Head: 45M * Max Flow: 45L/min -Max Suction: 8M * Pipe Diameter: 1"x1" -Copper Wire Motor -Brass Impeller *0.15m length cable

-Peripheral Pump -Voltage: 220V-240V-50/60Hz -Input Power: 370W(0.5HP) -Max Head: 35M * Max Flow: 35L/min -Max Suction: 8M * Pipe Diameter: 1"x1" -Copper Wire Motor -Brass Impeller *0.15m length cable

-Automatic self-priming peripheral pump -Voltage: 220V-240V-50/60Hz -Input Power: 370 W(0.5HP) -Max Head: 32M * Max Flow: 35L/min -Max Suction: 8M * Pipe Diameter:1"x1" -Copper Wire Motor *Copper Impeller *0.15m length cable -1 pc pressure switch * 1 pc 2L pressure tank

-Self Priming Jet Pump -Voltage: 220V-240V-50/60Hz -Input Power: 1500 W(2HP) -Max Head: 60M * Max Flow: 100L/min -Max Suction: 9M * Pipe Diameter: 1"x1" -Copper Wire Motor -Brass Impeller *0.15m length cable

-Self Priming Jet Pump -Voltage: 220V-240V-50/60Hz -Input Power: 1100W(1.5HP) -Max Head: 60M * Max Flow: 70L/min -Max Suction: 9M * Pipe Diameter: 1"x1" -Copper Wire Motor -Brass Impeller *0.15m length cable

-Input Power: 2000W *Capacity: 2.5L -Rated Voltage: 220V-240V-50/60Hz -Copper Wire Motor *Multiple cyclone -Hepa Filter *Air Flow: 2.0-2.3M³ -Vacuum pressure(Kpa)≥20KPa -Spray paint treating the surface -With speed control function *With thermo fuse

-Input Power: 800W -Capacity: 12L -Rated Voltage: 220V-240V-50/60Hz -Copper Wire Motor -HEPA Filter *Air Flow: 1.7M³ *Metal Tank -Wet and Dry Cleaning *2.3m Cord Length -1.5 flexible hose -3 plastic parts tube -1 plastic floor brush -1 set of 2 brushes

-127 pcs Tools Set -12V Li-ion -cordless drill ( CDLI1211) -1 PC Battery Pack -1 pc 24hr Charger -Charge Volts: 220V-240V-50/60 Hz -1 pc Cr-V 65mm bits -1 pc 4-6mm bits -1 pc 4-6mm (25mm) Socket Adaptor -6 pcs 1/4" Hexagonal Socket 5-6-8-9-10-11 mm -1 pc 80z Mini Claw Hammer -1 pc Test Pencil (Test voltage-100-500VAC) -1 pc 3M Steel Measuring Tape -1 pc 9mm Snap off blade knife -5 pc Twist Drill bits 2,3,4,5,6 mm -4 pc wood drill bits 4,5,6,8 mm -20 pcs Screwdriver bits -1 pc magnetic bits holder -40 pcs screws -20 pcs Plastic Plugs -20 pcs Self Tapping Screws

-115 pcs * Tools set -1 pc 680W Impact Drill -220V-240V -50/60 Hz 13mm Key chuck -1 pc 80z Claw Hammer -1 pc 7" Combination Pliers -1 pc SL5.5x100 screwdriver -1pc PHx100 screwdriver -1 pc 3M Steel Measuring Tape -4 pcs Wood Drill bits 4,5,6,8 mm -5 pcs Twist Drill bits 2,3,4,5,6 mm -5 pcs Masonry Drill bits 4,5,6,8,10 mm -1 pc 9mm Snap off blade knife -10 pcs Screwdriver bits -1 pc magnetic bits holder -1 pc Test Pencil -1 pc PVC Insulation Tape -40 pcs screws -40 pcs Plastic Plugs

-81 pcs *Household Tools Set -1 pc 12V Lithium ion 1.5 Ah batteries -1 pc battery pack -1 pc 24-hr charger -Charge Volts: 220V-240V -50/60 Hz -1 pc magnetic Bits holder -1 pc SL5.5x100 screwdriver -1pc PHx100 screwdriver -1 pc 7" Combination Pliers -1 pc 6" Adjustable Wrench -1 pc 80z Mini Claw Hammer -1 pc Test Pencil ( Test voltage-100-500VAC) -1 pc 3M Steel Measuring Tape -1 pc 9mm Snap off blade knife -5 pc Twist Drill bits 2,3,4,5,6 mm -4 pc wood drill bits 4,5,6,8 mm -20 pcs Screwdriver bits -20 pcs Screws -20 pcs Plastic Plugs

-Voltage: 220V-240V-50/60 Hz -Input Power: 1500W -Min Cutting Length: 127mm -Max Cutting Width: 318mm (12.5") -One time max cutting depth: 2.5mm -Range of cutting depth: 5- 153 mm -Feeding Speed: 8m/min -Blade Speed: 9000r/min

-Petrol engine -Engine power: 4.8Kw (6.5HP) -Weight: 79Kgs -Impact force: 10KN -Impact rate: 450-660rpm -Jumping stroke: 65mm -Shoe size: 33x29cm -Fuel tank volume: 2.0L

-Voltage: 220v-240v-50/60Hz -Input power: 1500W -No-load speed: 4500rpm -Blade size: 254mm(10")*16mm -Max cutting capacity: 80mm (90°)55mm(45 °) -Blade Tilting Range: 0-45 Degree -Main Al Die Casting Table Top -Right and Rear Extension Tables -With Left Sliding Table -Foldable Stand with Wheels -With Dust Bag, with Fence, Miter Gauge, Blade, Push Sticker -Storage -With Battery Lazer -High Quality Rip Fence Locks from Front and Rear -Up and Down torsion system for precision Cutting

-Voltage: 220v-240v-50/60Hz -Input power: 1500W -No-load speed: 4500rpm -Blade size: 254mm(10")*16mm -Max cutting capacity: 85mm (90°)60mm(45 °) -Blade Tilting Range: 0-45 Degree -Sheet Metal Table Top -Main Table Size: 430X638mm -Extension Table Size(left/right): 638X150mm -Extension Table Size(rear): 430X180mm -With Rip Fence, Push Sticker -With Miter Gauge -High Quality Rip Fence Locks From Front & Rear

-Voltage: 220-240V~50Hz -Input power: 750W(1.0HP) -Max.head: 13M -Max.flow rate: 18M3/H -Pipe diameter: 2" -Copper wire motor -Pump body: Stainless -Motor body: Cast iron -With 9m length cables

-Voltage: 220V-240~50Hz -Output power: 750W(1.0HP) -Max. head: 8m -Max. flow: 13000L/h -Max. depth: 7m -Pipe diameter: 1" -With 9m cables

-Voltage: 220V-240V - 50/60Hz -Input Power : 370w (0.5HP) -Max. head: 17M Max.flow:5.0M3/H -Stainless steel base, screws & shaft -Pipe diameter: 1” -Copper wire motor -9M length cable -Thermal protection -With float switch

-Voltage: 220V-240V -50/60 Hz -Input Power: 550W -Spraying Pressure:0.1-0.2 Bar -Max Flow: 380ml/min -Max Viscosity: 50DIN-s -Container Capacity :800 ml* 1 pc shoulder strap -1 pc viscosity measuring cup -1 pc nozzle cleaning needle

-Voltage: 220V-240V -50/60 Hz -Input Power: 450W -Spraying Pressure:0.1-0.2 Bar -Max Flow: 380ml/min -Max Viscosity: 50DIN-s -Container Capacity :800 ml -1 pc viscosity measuring cup -1 pc nozzle cleaning needle

- Working Range: 0-30m - 1 Horizontal Line and 4 Vertical Lines - Levelling accuracy: ±1.0mm at 5m - Line accuracy: ± 1.5mm at 5m - Levelling time <3s - Self-levelling range <3˚ - Laser Type: Red - Laser Class 3R, <5mW - Without tripods, match with HLLT01152 tripods - With cross lock function - With laser gain function - Operating temperature: 0-+40˚C - Storage temperature: -20-+70˚C - Batteries AA(1.5V)*4

-Voltage: 220V-240V -50/60 Hz -Input Power: 85W -No load speed: 0-1450rpm -Max Cutting Depth: 50mm *width: 410mm -Table Size: 375 x 250mm -Table tilting range: 0-45 -°Blade size:133*2.6*0.25mm(18TPI) -Induction Motor *Anti vibrat

-Size available: 39 - 46 -Category of protective footwear: SB steel toe cap -Fly knit upper -Dual density PU sole

-Size available: 39 - 46 -Category of protective footwear: SB steel toe cap -Split leather upper, Slip on boots -Dual density PU sole

-Size available: 39 - 46 -Category of protective footwear: SB steel toe cap -Split leather upper -Dual density PU sole

-Size available: 39 - 46 -Category of protective footwear: S1P : Steel toe cap + midsole + anti-static -Split leather upper -Dual density PU sole

-Voltage: 220v-240 v-50/60 Hz -Input Power: 1800W -No load Speed: 0-850 rpm -Impact Rate: 0-4200bpm *Impact Energy: 7J -Max Drilling Capacity: 36mm -Steel -13mm *Wood-42mm *SDS plus chuck system -With 3 drills + 2 chisels

-Voltage: 220v-240 v-50/60 Hz -Input Power: 1500W -No load Speed: 0-850 rpm -Impact Rate: 0-4400bpm *Impact Energy : 5.5J -Max Drilling Capacity: 32mm -Steel -13mm *Wood-40mm *SDS plus chuck system -With 3 drills + 2 chisels

-Voltage: 220v-240 v-50/60 Hz -Input Power: 1050W -No load Speed: 0-900 rpm -Impact Rate: 0-4000bpm *Impact Energy : 5J -Max Drilling Capacity: 28mm -Steel -13mm *Wood-40mm *SDS plus chuck system -With 3 drills + 2 chisels

-Voltage: 220v-240 v-50/60 Hz -Input Power: 800W -No load Speed: 0-1100 rpm -Impact Rate: 0-4000bpm *Impact Energy : 2.5J -Max Drilling Capacity: 26mm -Steel -13mm *Wood-30mm *SDS plus chuck system -With 3 drills + 2 chisels *Keyless Manual Chuck

-Voltage: 220v-240 v-50/60 Hz -Input Power: 800W -No load Speed: 0-1100 rpm -Impact Rate: 0-4000bpm *Impact Energy : 2.5J -Max Drilling Capacity: 26mm -Steel -13mm *Wood-30mm *SDS plus chuck system -With 3 drills + 2 chisels

-Size: M, L, XL -Material: 100% New PVC -Thickness: 0.33mm -With reflective strip at back

-Size: M -Material: 100% New PVC + Polyester -Length: 120cm -Thickness: 0.33mm -With reflective strip at back

-Size available: 39 - 46 -Material: 100% New PVC -High level Oil, Acid, Alkali resistance -Height: 20cm

-Size available: 39 - 46 -Virgin PVC/ Nitril material -High level Oil, Acid, Alkali resistance -Height: 37cm

-Input power: 3000W -Rated Voltage: 220V-240V-50/60Hz -Copper Wire Induction motor -Max Pressure: 130 Bar (1850PSi) -Flow Rate: 14L/min -800Hrs Lifetime -Net Weight: 51 kg -1Set metal spray Gun -10m high pressure hose -1Soap bottle

-Voltage: 220-240V~50Hz -Copper pump -Copper wire induction motor -Input power: 2800W -Max Pressure:180Bar (2600PSI) -Flow rate: 7.3L/min -Auto stop system -1pcs soap bottle -1 set metal spray gun -5m high pressure hose (steel wired)

-Input power: 2500W -Rated Voltage: 220V-240V-50/60Hz -Copper Wire Induction motor -Max Pressure: 160 Bar (2300PSi) -Flow Rate: 6.7L/min -Auto stop system -5m high pressure hose -1 Soap bottle -1 Spray Gun

-Input power: 2000W -Rated Voltage: 220V-240V-50/60Hz -Copper Wire Induction motor -Max Pressure: 150 Bar (2200PSi) -Flow Rate: 6L/min -Auto stop system -5m high pressure hose -1 soap bottle -1 spray Gun

-Input power: 1800W -Rated Voltage: 220V-240V-50/60Hz -Carbon Brush Motor -Max Pressure: 150 Bar (1900PSi) -Flow Rate: 6L/min -Auto stop system -5m high pressure hose -1 Soap bottle -1 Spray gun

-Voltage: 220-240V~50/60Hz -Carbon brush motor -Pure copper wire -Input power: 1400W -Max Pressure: 130Bar (1900PSI) -Flow rate: 5.5L/min -Auto stop system -1 set water spray gun (AMSG028 ) -5m high pressure hose (AHPH5028) -Packed by color box

-Pump Aluminium -Max Pressure: 214 bar (3100PSi) -Pump Type - 3 piston Axial cam -Fuel Volume: 3.6L -Type: Unleaded gasoline -Oil Volume: 0.6L -Engine speed: 3600 rpm -Starting system: Recoil -Displacement : 208cc -Engine Type: OHV 4-Stroke -Max Output: 6.0HP -Metal gun -Metal Lance -7.6M pressure hose + 3 nozzles

-Size: XL -Use for oil environment -Nitrile coated palm, smooth and rough texture palm finish

-Size: XL -Use for oil environment -Heavy nitrile fully coated gloves

-Voltage: 220v-240v-50/60Hz -Input power: 1400w -No-load speed: 180-480rpm/300-750rpm -Mixing pad thread: M14 -Aluminium gearbox -With 1 led light + 1 mixing pad

-Voltage: 220V-240V -50/60Hz -Input Power: 1800W -No-load speed: 5500rpm -Blade size: 255mm(10") *30mm -Cutting capacity: Mitre *Bevel *Width *Height -0° x 0°: 140*70mm -45°x 0°: 95x70mm -0° x 45°: 140 x 35mm -45° x 45°: 95 x 35mm -Aluminium base -Mitre cut 0-45° left and right -Bevel cuts up to 45° to left

-Voltage: 220V-240V -50/60 Hz -Input Power: 1400W -No load speed: 5000rpm -Max. Cutting capacity: 55x120mm -Blade Diameter: 8- 1/4" (210mm)*25.4mm -Aluminium Base -Mitre Cuts: 0 - 45" left and right -Bevel Cuts up to 45" to the left -Aluminum Base

-Voltage: 220V-240V -50/60 Hz -Input Power: 2400W -No load speed: 5000rpm -Blade Size:305mm(12")*30mm -Aluminium Base -Max.Cutting Capacity:109x315mm -Mitre Cuts: 0 - 45" left and right -Bevel Cuts up to 45" to the left -Double bar for smooth sliding + 1 TCT blade + Dust Bag

-Voltage: 220V-240V -50/60 Hz -Input Power: 1800W -No load speed: 4500rpm -Cutting capacity: 90x305mm -Blade Diameter: 10" (254mm)*16mm -Aluminium Base -Mitre Cuts: 0 - 45" left and right -Bevel Cuts up to 45" to the left -Double bar for smooth sliding -Saw body sliding range: 235mm

--Size: XL -Microfiber material palm with PU -Leather reinforced on palm enhance extreme abrasion resistance