FIXED COMBINATION RATCHET SPANNER • CrV • Chrome plated, satin finish

FIXED COMBINATION RATCHET SPANNER • CrV • Chrome plated, satin finish

FIXED COMBINATION RATCHET SPANNER • CrV • Chrome plated, satin finish • Packing: plastic hanger

FIXED COMBINATION RATCHET SPANNER • CrV • Chrome plated, satin finish

FIXED COMBINATION RATCHET SPANNER • CrV • Chrome plated, satin finish

9PCS FIGURE PUNCH • Carbon steel, hardened • Surface sandblasting

FENCING PLIERS • Drop forged carbon steel, heat treatment • With hammer head • Natural Polish • Dipped handle

FEELER GAUGES • 100mm, 13blatt • Chrome plated case • Polishing finished

TOLSEN F-CLAMP 120*800 (10193)

TOLSEN F-CLAMP 120*300 (10189)

F-CLAMP • Nickel plated bar • Black finished thread bar • Two-component plastic handle

EXTENSION POLE • Powder coated • Suitable for TOLSEN stock No.: 40054, 40057, 40059 • Extension pole connected with 40112, suitable for TOLSEN No.:40075, 40077, 40079, 40090, 40091

EXTENSION BAR • CrV • Satin finish

EXTENSION BAR • CrV • Satin finish

EXTENSION BAR • CrV • Satin finish

• CE approved • Voltage: 220-240V • Frequency: 50/60Hz • Noise: 40dB • Material: PP+AS, 100% new material • Installation: wall mounted • Suitable for kitchen, toilet and bathroom • High efficiency copper wire motor , powerful air exhaust • Easy installation and clean • Switch: Pull cord • Without plug

• CE approved • Voltage: 220-240V • Frequency: 50/60Hz • Noise: 42dB • Material: PP, 100% new material • Installation: wall mounted • Suitable for kitchen, toilet and bathroom • High efficiency copper wire motor, powerful air exhaust • Easy installation and clean • Without plug

EXHAUST FAN • CE approved • Voltage: 220-240V • Frequency: 50/60Hz • Noise: 40dB • Material: PP+AS, 100% new material • Installation: wall mounted • Suitable for kitchen, toilet and bathroom • High efficiency copper wire motor , powerful air exhaust • Easy installation and clean • Switch: Pull cord • Without plug

500A ELECTRODE HOLDER CE approval Material: Upper iron, Lower brass Nylon grip Includes 2pcs hex keys Electrodes through:3/32″-1/4″ (2.5mm-6.35mm)

ELECTRICIAN’S KNIFE • With bend head • Special stianless steel • Thickness:3mm • Fine polished wooden handle

EARTH CLAMP • Material of the handle: Chrome-plated iron • Gripper material: Bra

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

• For DRY hand operations • Size: 230x280mm(9″x11″) • Resin-bonded aluminum oxide abrasive

1pc 710W hammer drill: 230V, 50Hz, 13mm chuck; 1pc side handle; 1pc depth guage (plastic); 1pc combination pliers:160mm/6″; 1pc claw hammer: 8oz, drop forged; 1pc mini spirit level, 22.5cm, aluminium, with magnetic; 1pc snap-off blade knife, with 3pcs blades; 1pc adjustable wrench: 200mm/8″; 5pcs masonry drill bits: 4,5,6,8,10mm; 4pcs wood drill bits: 4, 5, 6, 8mm; 5pcs HSS drill bits: 3, 4, 5, 6, 8mm; 1pc screwdriver bit holder: 1/4″x60mm; 2pcs screwdrivers: SL5.5x100mm, PH1x100mm; 1pc nut screwdriver: 1/4″x100mm; 20pcs CrV screwdriver bits: 1/4″x25mm T10, T15, T20, T25, T27, T30,H3, H4, H5, H6,PH1, PH2, PH3, PZ1, PZ2, PZ3,SL4, SL5, SL6, 1/4″ bit adaptor 6pcs 1/4″ sockets set: 5, 6, 7, 8, 9, 10mm; 1pc voltage tester: 3x140mm; 1pc measuring tape: 3M/10x16mm; 40pcs screws set plastic screw plug: 4pcs 8x37mm, 6pcs 6x30mm, 10pcs 5x25mm wood screws: 4pcs 5x40mm, 6pcs 4x30mm, 10pcs 3x25mm

• Input power: 750W • Voltage: 230V • Frequency: 50Hz • No load speed: 180~2770RPM • 16 spindle speeds • Spindle travel: 80mm • Spindle Taper: MT2 • Chuck capacity: 16mm • Table diameter: Ø290mm • Table tilt: 45° left and right • Base size: 460x270mm • Max. distance from spindle end to surface of table: 725mm • Net weight:55Kgs • Machine height:1580mm

• Input power: 350W • Voltage: 230V • Frequency: 50Hz • No load speed: 620-2620RPM • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • Chuck capacity: 13mm • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm

• Special tool steel body • CrV socket with 12 points • Black finished

TOLSEN DOUBLE SOCKET WRENCH 17 X 21 MM(15293)

TOLSEN DOUBLE SOCKET WRECNH 19 X 22 MM (15296)

TOLSEN DOUBLE RING WRENCH SET (15077)

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

DOUBLE RING SPANNER • CrV • Chrome plated, satin finish

CERTIFIED ORIGINAL TOLSEN BRAND Size : 6×7,8×9,10×11,12×13,14×15,16×17,18×19,20×22,21×23,24×27,25×28,30x32mm CrV Chrome plated, matte finish

8PCS DOUBLE OPEN END SPANNERS SET • CrV • Chrome plated, satin finish

DOUBLE OPEN END SPANNER • CrV • Chrome plated, satin finish

DOUBLE OPEN END SPANNER • CrV • Chrome plated, satin finish