• Material : PP + EVA • With a shank • Packing: poly bag with paper hanger

TOLSEN AVIATION SNIP S 10'' (30022)

• CrMo • Two-component plastic handle • Packing: blister card

TOLSEN AVIATION SNIP L 10'' (30021)

• CE approved • Light state: DIN.4 • Dark state: DIN.9-13 • Switching time(s): 1/25000 • Delay time: 0.2-0.8s continue adjustable • Power supply: Solar cells & lithium batteries • Power on/off: Fully automatic • Shade knob: Out • Sensitivity: Adjustable • Suitable for ARC, TIG, MIG, Spot, Micro, Wire, AC, DC, and Plasma Welders and Plasma Cutters • Packing: color box

• 1pc Automatic torque wrench, 1/2″, GS approved, ±4% accuracy deviation, torque range : 40-210Nm • 1pc Extension bar : 1/2″x125mm • Packing: plastic box with color label + shrink

• CE approval • Input power: 1100w • Rated Voltage: 220-240V • Frequency:50/60Hz • Max. current: 10A • Staring pressure:1.5bar • Max. working pressure: 10bar • Pipe diameter: 1″x1″ • Waterproof Rate: IP65

• Oversize: 53x49x23cm • Fits hose size up to 1/2″x 15M+1.5m/50FT • Hose can be locked at any length • With slow retraction function • Packing: color box

TOLSEN ARBOR 14-30 mm (75700)

• Black Color • High quality environmental EVA foam • RoHS approved • Water resistant • Easy to clean mats are great for use around sinks and washers to prevent injuries and to protect floors • Great for use in work shops and garages to prevent fatigue • Packing: shrink with color paper

• Aluminium handle • Powder coated finish • Packing: hang tap with PE bag

• Aluminium handle • Powder coated finish • Packing: hang tap with PE bag

• Powder coated finish • Packing: color label thickness- 400x600mm 16"x24

• CE approval • Input power: 950W • Voltage: 230V • Frequency: 50Hz • No load speed: 9500r/min • Disc diameter:125mm • Spindle thread:M14 • Plug & cable: CE approved 2m • Power-off protection • Accessories contain: 1 pair Carbon brush 1pc auxiliary handle 1pc wrench • Packing: color box

Input power: 760W Voltage: 230V Frequency: 50Hz No load speed: 11000r/min Disc diameter:115mm Spindle thread:M14 Accessories contain: 1pc wheel guard 1 pair Carbon brush 1pc side handle 1pc wrench

•GS/CE approval •Input power: 2400W •Voltage: 230V •Frequency: 50Hz •No load speed: 6000r/min •Disc diameter:230mm •Self-lock-preventing switch •Soft starter •Plug & cable: CE approved 2m •Accessories contain: •1 pair Carbon brush •1pc side handle •1pc wrench •1pc hex key 6mm

• Material: Aluminum • Thickness: 1.0mm • Packing: color label with shrink

• Material: Aluminum • Thickness: 1.0mm • Packing: color label with shrink

• Stainless alloy body (2Cr13) • Aluminium base • Packing: paper hanger

• Stainless alloy body (2Cr13) • Aluminium base • Packing: paper hange

• CE approval • Pistol-Grip with dial • Dial reads 0-12 bar and 0-170 psi • Suitable for use with motor vehicles,cycles,dinghies,etc • Clip-on connector • G1/4 threaded connectors • Length: 40cm

• CE approval • Suitable for staples: Crown staples 21Ga. 0.95*0.66mm: 6-16mm • Magazine capacity: 120pcs • Operating pressure: 60psi(0.4Mpa)-100psi(0.7Mpa) • Air inlet: 1/4″ • Net weight: 0.8kg • Ideal for upholstering, cabinet assembly, furniture manufacturing • Accessories: 300pcs Crown staples 2pcs hex key 1pc oil pot 3pcs quick coupler with 1/4″ PT male thread

• CE approved • Square drive: 1/2″ • Operating air pressure: 6.2BAR (90PSI) • Air consumption: 110L/min • Air inlet: 1/4″ • Air hose: 3/8″ • Max torque: 69NM(50FT-LB) • Free speed: 160 rpm • Net weight: 1.18KGS

CE approval • Suitable for brads: F brads 18Ga. 1.26×1.05mm: 10-50mm K brads 18Ga. 1.26×1.05mm: 13-40mm • Magazine capacity: 100pcs • Operating pressure: 70psi(0.5Mpa)-110psi(0.75Mpa) • Air inlet: 1/4″ • Net weight: 1.3kg • 360° adjustable exhaust • Depth adjustable • No-mar tip protects work surface • Reload indicator • Accessories： 300pcs F brads 300pcs K brads 2pcs hex key 1pc oil pot 3pcs quick coupler with 1/4″ PT male thread

CE approved • Square drive: 1/2″ • Twin hammer provides more torque and less vibration • Operating air pressure: 6.2BAR (90PSI) • Average air consumption: 120L/min (with 5-speed regulator) • Air inlet: 1/4″ • Air hose: 3/8″ • Max. torque: 1000NM (735FT-LB ) • Free speed: 6000 rpm

• CE approval • Inner diameter: 6mm • Outer diameter: 8mm • Maximum working pressure: 16Bar (230psi) • Hose Connector: 1/4″

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Drop forged high quality tool steel • Black finished and polished • Two-component plastic handle

• Adjustable from fine mist to powerful jet stream • Durable ABS body with TPR comfort grip • Packing: skin card

• Stainless steel(2Cr13) • ABS handle • With spirit level • Packing: color label

• 1pc 3M/10ftx16mm measuring tape • 1pc PH1x100mm phillips screwdriver • 1pc SL5.5x100mm slotted screwdriver • 1pc 200mm/8″ adjustable wrench • 1pc 160mm/6″ diagonal cutting pliers • 1pc 180mm/7″ combination pliers • 1pc snap-off blade knife • 1pc 3x140mm voltage tester • 1pc 19mmx10yards pvc insulating tape • Packing: canvas bag

Toolbox 5 Tray; 495x200x290mm Water Pump Pliers 250 mm Locking Pliers 250mm; CrV Combination Spanner; CrV; 8,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22, 24mm Screwdriver; CrV; SL3.0 x 75mm, SL5.5 x 100mm, SL6.5 x 150mm, SL8.0 x 150mm，PH1 x 100mm, PH2 x 150mm, PH3 x 150mm Comination Pliers 180mm Long Nose Pliers 160mm Diagonal Cutter Pliers 160mm 1/2″ Extension Bar 125mm; CrV 1/2″ Extension Bar 250mm; CrV 1/2″ 3 Way adaptor; CrV 1/2″ Spark Plug Socket 16mm; CrV 1/2″ Spark Plug Socket 21mm; CrV 9pcs Ball Point Long Arm Hex Key Set; CrV; 1.5-2-2.5-3-4-5-6-8-10mm 1/2″ Socket 6 Point; CrV 50BV30; 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm 1/2″ Reversible Ratchet; 45T; CrMo 1/2″ Universal Joint ; CrV • Packing: color box

• 3 ultra-bright LEDs • 2 magnets at the ends of the Lamp • Flexible neck 17.5-57cm • Aluminium body • 4 batteries Lr44

• Material: 40Cr • Sand blasting finishing • Packing: blister card

• DIN3123 • Material: 40Cr • Sand blasting finishing • Packing: blister card

• Contains:Heavy duty plastic tool box; 17″(420x230x190mm) 5pcs combination spanners set; 8/10/13/17/19 mm 9pcs long arm hex key set; 1.5/2/2.5/3/4/5/6/8/10 mm Screwdriver; CrV; SL3.0 x 75mm,SL5.5 x 100mm, SL6.5 x 150mm, PH0 x 75mm, PH1 x 100mm, PH2 x 150mm Measuring tape; 5mx19mm, MIDII Garden gloves; 10(XL) Combination Pliers; 180mm, 7” Machinist hammer; 300g Snap-off blade knife;18mm • Packing: color sleeve • 12 sets packed in one TOLSEN PDQ (445x700x1000mm)

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated

• Material:50BV30,heat treatment • Acc.to DIN3124, ISO2725-1 • 1/2" Square driver as per DIN3120, ISO1174, with ball retaining groove • Hand-operated, polished, chrome-plated